How Do I Program My Samsung Remote Control?

How To Programme A Spectrum Remote (Step-by-Step Guide)

Spectrum remotes are generally piece of cake to use and understand, just programming them at outset can be tricky. Luckily, it takes no fourth dimension at all if yous prepare the device and scan for codes. Permit's have a wait at the few simple steps that it takes to program a Spectrum remote.

In today's technologically-minded world, yous're likely to have multiple electronic devices for home entertainment . There are televisions, cable boxes, DVD players, Blu-Ray players, well, yous get the idea. When you take to switch betwixt a bunch of remotes to work everything, it tin can be a existent pain.

Luckily, with a Spectrum universal remote, y'all can plan your remote to work with multiple devices. First, identify the model of Spectrum remote that yous take as instructions can vary. Then, with only a few push pushes and the right code, y'all can say good-bye to remote command clutter.

If you're tired of juggling six different remotes (or losing them), a Spectrum remote is a great solution. Once y'all have your remote programmed, you lot tin can savor seamless amusement (and a neater coffee tabular array).

What Kind of Spectrum Remote Do You Accept?

Starting time things first, you need to know exactly what kind of Spectrum remote you have. There are several models, and the programming method for your remote will vary based on the model.

If you still accept the manual that came with your Spectrum remote, you could probable wait upwards the info. But really, who keeps those things? Instead, information technology's all here for you in one identify!

Here's a quick list of popular Spectrum remote models:

RC 122
UR5U-8780L/8790L
UR3-SR3S (UR3-SR3M)
URC-2060
1060BC2/1060BC3
UR2-RF-CHD
M2057
Spectrum Guide Remote

To learn your remote's model number, simply remove the battery cover. Yous volition see the model number printed on the remote. Done!

How to Plan a Spectrum Remote

It's all in the codes! To program your Spectrum remote with your TV or another device, you will need the proper brand code.

We've included a handy list for you at the stop of this article that includes many popular brands. Therefore, whenever you lot see "enter code" in our "How-To" guide, simply use the listing to notice the right code for you lot!

You can too practice a code search by visiting Spectrum'south support page to notice the usable codes.

Note: Depending on what model remote you lot have, you lot may or may not be able to program it with components. Some models are only programmable with your television. Basically, if your remote features a device-selection button (like DVD, CBL, etc.), then you tin can program information technology with these devices.

Programming a Spectrum RC-122 Remote

You tin can try to program the remote using the auto-search method outset.

Step one: Prep Your Device

Turn on the device you want to apply with your remote and printing the respective button on your remote. For example, if you're programming the remote for your Television receiver, press the "Television" push, "DVD" for your DVD role player, etc. At the same fourth dimension, also press the "SELECT/OK" button.

Agree both buttons down until all of the device's buttons glimmer twice.

Step 2: Browse for Codes

Indicate the remote at the device and press nine-9-i on the remote. The push you selected in pace one (Telly, DVD, etc.) should glimmer twice. Printing the "PLAY" arrow one fourth dimension.

Step 3: Test the Remote

If your device powers off afterward pressing "PLAY," press the "POWER" push to turn it back on. Exam your device with the remote (changing channels, etc.). If it operates correctly, so programming was successful; press "SELECT/OK" to store the code.

If your device is not responding, then try the side by side step.

Step 4: Try Different Codes

If, afterward pressing "PLAY," the device does not power off, printing "REWIND" or "FF" to movement through available codes. Do this until the device turns off, and so immediately press "SELECT/OK."

Verify that your remote is successfully programmed by following Step 3, starting with powering on your device.

The Manual Method for RC-122

If the auto-search method doesn't work, you demand to enter the code for your device manually. To practise this, follow the steps higher up, simply instead of entering 9-ix-i in Step two, enter your device'south code.

Wait one second between entering each number of the lawmaking. Your device's buttons should blink 3 times (if non, try another lawmaking).

Then verify that the code worked by testing out your remote. If it doesn't, repeat the procedure using a dissimilar lawmaking.

Programming a Spectrum UR5U-8780L/8790L Remote

You can try to program the remote using the auto-search method first.

Step 1: Prep Your Device

Again, plough on the device yous want to use with your remote and press the respective button on your remote. Simultaneously press the "SELECT/OK" push for 3 seconds; the device'southward LED light should come on for 30 seconds.

Step 2: Scan for Codes

Point the remote at the device and printing the "CH+" or "CH-" buttons, one at a time, or proceed one pressed. Do this until the device turns off and the remote emits power on/off signals.

Pace 3: Exam the Remote

Press the "Ability" push button to plow on your device and exam out your remote. If information technology isn't working, repeat steps one and two.

If it is working, printing the corresponding device button on the remote to store the code. The LED on the device button should blink twice.

The Transmission Method for UR5U-8780L/8790L

Repeat footstep one from above, and and so, while pointing the remote at the device, enter the appropriate code. NOTE: You must complete this stride during the 30-second window when the LED light comes on afterward pace one.

Try i lawmaking at a time until the device turns off. Then exam the remote with your device, and press the device push button on your remote to shop the lawmaking.

Programming a Spectrum UR3-SR3S (UR3-SR3M) Remote

The programming for this model is very similar to the programming for the remote above – model UR5U-8780L/8790L. At that place are simply two main differences.

One variation is that in pace one, the LED will glimmer for xx seconds instead of xxx. The other deviation is, once your device powers off, y'all should press "MUTE" to test your device.

Programming a Spectrum URC-2060 Remote

There are but a few steps to program this detail remote using the automobile-search method.

Turn on your television, and so hold down the "SETUP" button until the LED low-cal blinks twice. Press the "TV POWER" push button, then hold down the "OK/SELECT" button until the TV turns off.

Manual Method for URC-2060

If you lot need to enter the lawmaking direct, when the LED lite blinks twice, enter the appropriate code. Then utilise the "Ability" button on the remote to turn off the TV. If it works, the lawmaking is right. If non, endeavor the side by side code.

Programming a Spectrum 1060BC2/1060BC3 Remote

This remote is already programmed to operate an RCA television, a Toshiba DVD player, and a Pioneer audio receiver. If you need to program it to a different device, follow these steps to put in the necessary codes:

Footstep one: Prep Your Device

Turn on the device you want to program your remote for and insert any media (DVD, Blu-Ray, etc.), if applicative.

Pace 2: Enter the Code

Press the respective device cardinal on your remote in one case. Then, hold downward the "SETUP" cardinal until the selected fashion cardinal blinks twice. Enter the appropriate code; the selected mode key will blink twice.

Stride 3: Test the Remote

If the selected mode cardinal blinks for a long time, then endeavour the above steps again with the same code. So, aim the remote at the device and press "POWER" or "PLAY." If the device turns off, it works!

If not, repeat the steps using a dissimilar code from the list until yous find one that works.

Programming a Spectrum UR2-RF-CHD Remote

To program this remote with your idiot box using the auto-search method, follow these steps:

Step 1: Prep Your Devices

Turn on your Spectrum receiver and tv set.

Footstep 2: Enter Auto-Search Mode

Aim your remote at the TV and hold down the "PROG" button for five seconds. Once the blood-red power button lights up, release the "PROG" push. The blood-red calorie-free should stay on.

Press the "CH+" push to enter motorcar-search mode. The remote transmits a code every one.five seconds, and the red light will blink. This can take up to 15 minutes.

Equally shortly as your tv turns off, press the "TV" push to shop the code.

Step iii: Test the Remote

Test the remote past using it to turn the Idiot box on and off and adjust the volume. If it doesn't work, repeat the steps and endeavour pressing the "TV" button faster when your television turns off.

The Manual Method for UR2-RF-CHD

In Footstep 2 above, when the red light comes on, instead of pressing the "CH+" push, press the "TV" button. The scarlet light should blink once and stay on.

Enter the iii-digit code, and if information technology is correct, the red light will blink twice, turn off, and the code is stored. If the lawmaking is wrong, the red light will glimmer twice and stay on, and you lot tin attempt another lawmaking. You can also cancel the process past pressing the "TV" button.

Examination out your remote to brand sure it works, and if information technology does not, echo the process with a different code.

Programming a Spectrum M2057 Universal Remote

You can utilise this remote with multiple devices; try the auto-search method first:

Step i: Prep Your Device

Plough on the device yous want to use your remote with and press the corresponding device button on the remote. Hold down the "SETUP" button until the selected device button blinks twice.

Step 2: Search for Codes

Press nine-ix-1 on your remote; the device button will glimmer twice. Pointing the remote at the device, alternate between pressing the "Ability" button and the device button until the device turns off. Printing "SETUP" to shop the code, and the device button should glimmer twice.

Step three: Exam the Remote

Exam your remote with the device to make sure it works properly. If not, try the in a higher place steps again or get to the transmission method.

The Manual Method for M2057

Follow Step 1 above, then instead of pressing ix-9-1, enter the code for your detail device. If the code works, then the device button should blink twice. And, y'all should be able to plough off the Boob tube with the remote'south "POWER" push.

If the lawmaking is incorrect, and so the device button volition give one long blink then exit programming mode. If this happens, try the procedure again with a different code.

Programming a Spectrum Guide Remote

Using the Motorcar-Search method is the simplest way to program this remote. Ensure the Television is on and hold downwardly the "Carte du jour" and "OK" buttons simultaneously until the "INPUT" push blinks twice.

Press the "Television receiver POWER" push button, and the input light should get solid. Aim the remote at the TV and agree down the "Up" arrow until the TV turns off. The correct code should now be stored, and you can test out your remote!

The Manual Method for Spectrum Guide Remote

If machine-search isn't doing the trick, when the input light blinks twice, enter the code for your device. The lite volition glimmer twice, and you lot tin can test out your remote. If it doesn't work, movement on to the adjacent code in the listing.

What If My Spectrum Remote Doesn't Piece of work?

If you tin't get your Spectrum remote to piece of work with your Television receiver or other devices, start with the obvious. Ensure the remote has the correct batteries and that the batteries are working and installed properly.

As well, make sure that your Spectrum receiver cablevision box is turned on and not blocked by any furniture or other objects. Yous can also reboot your receiver by unplugging it and plugging it back in afterward 60 seconds.

Sometimes, repositioning your cable box slightly can assist and so that information technology can find your remote more easily. You might besides need to try reprogramming your devices or perform a factory reset on your remote.

Performing a Factory Reset on Your Remote

Some models of Spectrum remotes offer a manufactory reset option. A factory reset simply returns your remote to its out-of-the-box settings so you tin can "first from scratch." If you desire to try a factory reset on your remote, the steps vary depending on the model.

RC-122

Hold downwardly the "CBL" and "SELECT/OK" buttons at the same time until the remote lights flash twice. Enter ix-viii-1, and the lights should flash three times.

UR5U-8780L/8790L

Hold down the "CBL" and "REC" buttons until the remote lights move from correct to left three times.

UR3-SR3S (UR3-SR3M)

Hold down the "CBL" and "REC" buttons until the remote lights move from right to left three times.

URC-2060

Hold downwards the "SETUP" push button until the Cable Power LED flashes twice. Press 9-7-7, and the Cable Ability LED should flash iii times.

UR2-RF-CHD

Agree downwards the "PROG" push button for 5 seconds. The carmine "POWER" push button will low-cal upwardly. Press 9-8-7, waiting for the red light to blink once later each number.

After pressing all the numbers, the ruby-red "POWER" button will rapidly glimmer twice.

If none of these tips work, you might need a new remote. You tin can contact Spectrum or visit a Spectrum store well-nigh you to get a replacement. You lot can also purchase some models on Amazon for between $five and $fifteen.

Spectrum Remote Codes

Here'south a glance at the codes for popular brands. Notice that many brands have several codes. When programming your remote, kickoff with the get-go lawmaking listed for your device, so move on to the adjacent if necessary.

Make	Codes
Dynex	2049
Insignia	454, 402, 457, 350, 400, 403, 052 2049, 1423, 1564, 0171, 0463, 1204, 1326, 1517, 1660, 1963, 2417, 2751
LG	569, 113, 112, 116, 127, 102, 143, 363, 284, 106 1423, 0178, 0017, 1768
Magnavox	1867, 1454, 2597, 1755, 0171, 0051, 1365, 1913, 1963, 1990, 2492
Panasonic	034, 359, 164, 080, 552, 524, 056, 208 1480, 1927, 1947, 1925, 0051
Philips	363, 164, 333, 161, 038, 059, 005, 116, 431, 206, 594, 093, 127, 003 1867, 1454, 2597, 0171, 1365, 1990, 2492, 2622, 2992
RCA	2434, 2746, 2932, 0047, 2183, 3382, 0051, 1661, 1958, 1959, 1868, 0090, 2855, 3577, 3717
Samsung	143, 105, 363, 229, 050, 228, 089, 258, 127, 333 2051, 1959, 0178, 0812
Precipitous	029, 251, 014, 363, 175, 308, 143, 022, 019, 028 2360
Sony	001 0810, 1685
TCL	2434
Toshiba	258, 138, 325, 040, 030, 230, 007 1524, 1343, 1369, 1935, 1959, 2684
Vizio	386, 387 1758, 2707, 0864, 1756, 0885
Zenith	1423, 0178, 0047, 0017, 0463, 1661, 1365